Second Hand 2022 Wheel Loader Liugong 862H For Bulk Material Loading And Unloading

This is a 2022 Liugong 862H wheeled loader. The vehicle is in extremely good condition, almost like a new one. It has been used for 400 hours and has saved approximately $11,000 compared to a new vehicle. The Liugong 862H wheeled loader is equipped with a Cummins QSL9.3 electronically controlled engine, which combines high performance with low fuel consumption. The integrated fully open engine hood allows most maintenance to be performed from the ground. The world-class maintenance performance significantly reduces the labor intensity of maintenance and saves maintenance time.

Equipment model CLG862H

Model abbreviation 862

Rated load capacity (kg) 6000

Operating weight of the whole machine (kg) 19500

Bucket capacity (m ³) 3.5

Maximum excavation force (excavation force) (kN) 195

Maximum Traction Force (kN) 192

Walking mode: tire type

Universal type for working conditions and purposes

Tonnage range 5-8 tons

Power type: fuel engine (fuel)

Engine brand Cummins

Model QSL9.3

Type six cylinder inline, four stroke turbocharged

Rated power/speed (kW/r/min) 180/2200

Maximum torque/speed (N · m/r/min) 1187

Total displacement (L) 9.3

Transmission speed 1st gear (forward/reverse) (km/h) 13.5/16

Transmission speed 2nd gear (forward/reverse) (km/h) 40

Fuel quantity (fuel tank capacity (L)) 330

Engine oil (L) 28

Cooling system (L) 35

Overall length (mm) 8628

Overall width (mm) 3046

Overall height (mm) 3467

Minimum ground clearance (mm) 460

Wheelbase (mm) 3450

Track width (mm) 2280

Unloading height - Unloading angle is 45 ° (mm) 3100

Unloading distance - Unloading angle is 45 ° (mm) 1150

Steering angle (°) 38

Minimum turning radius (based on the center of the outer wheel) (mm) 6300

Boom lifting time (s) 5.2

Three items and time (s) 10

Performance Features

The Liugong 862H adopts advanced technology and excellent matching, with a completely new upgraded exterior structure design, providing greater safety, comfort, and convenience. The standout advantage of the 862H hydrostatic loader compared to ordinary loaders is fuel efficiency. It supplies oil as needed, has no overflow losses, and no power waste. Under average working conditions, the average fuel consumption is as low as 12L/h, which is 25% lower than that of the same-level hydraulic transmission loaders. This results in annual fuel savings of 100,000 yuan. In terms of the vision system, it is equipped with high-definition cameras and a 360° panoramic imaging function, allowing the driver to have a clearer view during operation, without any blind spots to observe the surrounding environment, avoiding collisions, and enhancing operational safety. It also features night vision.

Maintenance And Care

As an indispensable piece of machinery in construction projects, loaders are crucial for the progress of the project. Regular maintenance and care of the loader can not only extend the service life of the equipment but also ensure the stability of its working performance and reduce the failure rate. 

1. Clean the air filter and oil filter every 100 hours of work or every two weeks;

2. Replace the engine oil and oil filter every 250 hours of work or monthly;

3. Replace the hydraulic oil and hydraulic filter every 500 hours of work or quarterly; Check the engine valve clearance and make adjustments;

4. Replace the transmission oil and drive axle gear oil every 1000 hours of work or every six months; Check and replace the diesel filter and air filter of the engine; Check and adjust the operation of the engine, and perform maintenance or replace components if necessary;

5. The lubricating oil of the loader is crucial for the normal operation of the equipment. Strengthen the lubrication at each lubrication point. It is recommended to add lubricating grease to the lubrication points every shift to reduce mechanical wear and extend the equipment's lifespan.