Low-Hour Used XCMG QY16KJ 16-Ton Truck-Mounted Crane for Argentina

This 10-year-old government-decommissioned vehicle operates like new, with only 600+ operating hours and 1,000+ kilometers traveled. Featuring 90% tread remaining on tires, a never-touched spare tire, and pristine cabin interior (original seat protective film intact), it's powered by a fully functional Shangchai large-pump diesel engine and verified operational hydraulic systems. Every component remains in factory-fresh condition." 

We specialize in the global export of high-quality used truck cranes. Fully aware that lifting operations impact safety, efficiency, and project success, we never use 'low price' as a gimmick. Instead, we treat the quality and reliability of every unit as our non-negotiable lifeline. Choosing us means choosing confidence, operational efficiency, and long-term investment returns."

 XCMG QY16KJ 16-Ton Truck Crane Specification

Max. lifting capacity: 16 tons (at 3m radius)  

Working radius range: 2.5m–22m  

Min. rated load: 0.6 tons (at 22m)  

Drive type: 4×2 rear-wheel drive  

Max. speed: 80 km/h  

Gradeability: ≥30%   

Engine model: Shangchai SC7H180Q3 diesel engine  

Power output: 132 kW (180 hp)  

Fuel tank capacity: 200 L  

Main boom length: 10.5m (basic) / 31m (fully extended)  

Max. lifting height: 38m (31m main boom + 7m jib)    

Overall dimensions (L×W×H): 11.2m × 2.5m × 3.4m  

Total weight: 20.8 tons  

Longitudinal: 5.2m  

Transverse: 5.6m  

Daily Maintenance for Truck Cranes

1. Regularly inspect tightening conditions of all fasteners, especially slewing bearing bolts.  

2. Test brake assemblies of hoisting mechanisms weekly to ensure safety compliance.  

3. Maintenance schedule:  

- Weekly: Clean/lubricate main boom lower surfaces  

- Monthly: Maintain hooks, drive shafts, wire ropes, boom pivot pins  

4. Gear oil replacement: Approximately every 12 months. Monitor fluid levels and top up if low.  

5. Hydraulic fluid management: Filter or replace every 6 months under normal operation.  

6. Pre-operation safety checks: Verify all safety devices daily; repair faults before use.  

Mandatory Replacements Before Machinery Shipment  

1. Full fluid renewal: Engine oil, hydraulic fluid  

2. Filter replacements: Engine oil filter, diesel filter, air filter  

3. Wear-prone components: All damaged/deteriorated parts replaced with new OEM-grade components