Used 2020 Komatsu Excavators 210-8 Of Building Demolition For Kuwait

Abount Komatsu Excavators 210-8

Description

This is a 2022 model of a used Kahoiki excavator, with the model number 210-8. Its service life is relatively short, but it has stable performance and is suitable for various working environments. At the same time, its cost performance is very high. The original factory parts of the Kahoiki brand can be replaced at will, so it is a high-quality product that buyers can trust.

Komatsu Excavators 210-8 Specificaion

Equipment model PC200-8

Working weight 19500-19900kg

Maximum excavation depth of 6920mm

Maximum unloading height 7035mm

Boom fuel tank capacity: 400L [degree 5700mm]

Model: SAA6D107E-1

Total displacement: 6.69L

Bucket capacity: 0.8-1.03m ³

Hydraulic oil tank capacity: 136L

Maximum excavation radius: 10180mm

Maximum excavation depth: 6920mm

Maximum unloading height: 7035mm

Transportation dimensions: 9885 × 2980 × 3185mm

Performance characteristic

Equipped with Komatsu SAA6D107E-1 6-cylinder direct injection turbocharged engine, rated power of 110kW/2000rpm, total displacement of 6.69L, meeting the National III emission standard.  Supports economic mode (E0-E3) and fast mode (P), and can adjust fuel efficiency and power output according to operating conditions.  Adopting a variable displacement piston pump, the system pressure reaches 37.3MPa, ensuring smooth composite action.  The hydraulic oil tank has a capacity of 136L and supports long-term high-intensity operation.  The body adopts a high durability design, optimized heat dissipation system, and avoids overheating problems.  Easy to maintain, the fuel pre filter element has oil-water separation function, and the oil change cycle is relatively long (about 200 hours).

In order to ensure that our quality can reassure and satisfy customers We will conduct a detailed inspection of each excavator to ensure that each one is in good working condition. Before the machinery is dispatched, for each piece of equipment, we will replace the engine oil, hydraulic oil, gear oil, new air filter, oil filter, diesel filter, as well as the oil inlet/return/pilot/pipeline filter elements. Other damaged parts will also be replaced with new ones.

Maintenance

1.Engine oil needs to be replaced regularly, with a general replacement cycle of 500 hours.

2.Hydraulic oil should be replaced according to the prescribed maintenance cycle, which is 2,500 to 3,000 hours.

3.Timely addition of lubricating grease can effectively reduce the wear of each component and ensure smooth operation of all components.

4.Regularly clean or replace the air filter element and air filter to ensure that the engine sucks in clean air and improve fuel efficiency. In harsh working conditions such as heavy dust, the frequency of inspections should be increased.

5.Check the coolant level to keep the cooling system unobstructed and prevent overheating.

6.Clean the radiator. When an excavator is in operation, it generates a large amount of heat. The cleaning of the radiator is very important for maintaining the normal operation of the engine. 7. Tracks are important components of excavators. Appropriate track tension can extend the service life of tracks. Regularly inspect and adjust the tension of the tracks to ensure they are within a consistent standard range.

7.The transmission system is an important component of an excavator. Regular checks should be conducted on the transmission chain, gears and other parts, and severely worn components should be replaced in a timely manner.

Through the above daily maintenance measures, faults can be effectively prevented, the service life of excavators can be prolonged, and the safety and smooth progress of work can be ensured