Used 2020 Wheel Loader Liugong 856H Snow Removal Operation For Nordic Region

This is a 20202 model Liugong 856H loader. It has excellent performance, the entire vehicle is in original paint, and the working duration is 2700 hours! The Liugong 856H is the flagship 5.5-ton loader of the Liugong H series. It uses a world-class Cummins engine and features advanced technology and excellent matching, enabling it to easily handle various harsh working conditions and environments.

About Wheel Loader Liugong 856H

Model abbreviation 85

Rated load capacity (kg) 5000

Operating weight of the whole machine (kg) 16800

Bucket capacity (m ³) 1.8-5.6

Maximum excavation force (excavation force) (kN) 158

Maximum Traction Force (kN) 160

Engine (fuel) model Cummins 6CTA8.3-C215

Type 6-cylinder inline, water-cooled, 4-stroke, direct injection diesel engine

Rated power/speed (kW/r/min) 162/2200

Maximum torque/speed (N · m/r/min) 908/2200

Rated working pressure of hydraulic system (Mpa) 20

Number of boom cylinders - cylinder diameter x stroke (mm x mm) 160 x 785

Number of bucket cylinders - cylinder diameter x stroke (mm x mm) 180 x 540

Fuel Quantity - Fuel Tank Capacity (L) 280

Oil Quantity - Hydraulic System (L) 210

Oil Quantity - Cooling System (L) 45

Oil Quantity - Transmission System (L) 45

Machine parameters | Machine length (mm) 8060

Overall width (mm) 2976

Overall height (mm) 3467

Minimum ground clearance (mm) 431

Bucket width (mm) 2976

Wheelbase (mm) 3250

Track width (mm) 2150

Unloading height - Unloading angle is 45 ° (mm) 5243

Steering angle (°) 38

Minimum turning radius (based on the center of the outer wheel) (mm) 7010

Tire size 23.5-25

Steering system flow rate (L) 138.6

Speed (r/min) 2200

Braking system, driving brake form, fully hydraulic wet braking system

This is a Liugong 856H loader equipped with a Cummins QSL9.3 engine, with a maximum power of 184 horsepower and a torque reserve coefficient that can meet the requirements of instantaneous overload. It features advanced technology and excellent matching, and is equipped with the world-renowned ZF transmission and drive axle. The 4WG200 transmission has 4 forward gears and 3 reverse gears. For frequent forward and reverse switching operations, the subdivision of forward and reverse gears is particularly important for its economy and engine lifespan. In addition, the electric shifting is effortless and labor-saving, with fast shifting speed and minimal impact; the AP400 drive axle is particularly suitable for heavy construction machinery. The ZF limited slip differential can convert driving force into greater traction even under harsh conditions, reducing tire wear.

Maintenance And Care

As an indispensable piece of machinery in construction projects, loaders are crucial for the progress of the project due to their efficient and stable operation. Regular maintenance and care of loaders not only prolongs the service life of the equipment but also ensures the stability of its working performance and reduces the failure rate. 

1. Clean the air filter and oil filter every 100 hours of work or every two weeks;

2. Replace the engine oil and oil filter every 250 hours of work or monthly;

3. Replace the hydraulic oil and hydraulic filter every 500 hours of work or quarterly; Check the engine valve clearance and make adjustments;

4. Replace the transmission oil and drive axle gear oil every 1000 hours of work or every six months; Check and replace the diesel filter and air filter of the engine; Check and adjust the operation of the engine, and perform maintenance or replace components if necessary;

5. The lubricating oil of the loader is crucial for the normal operation of the equipment. Strengthen the lubrication at each lubrication point. It is recommended to add lubricating grease to the lubrication points every shift to reduce mechanical wear and extend the equipment's lifespan.