2020 Used Volvo EC480 Crawler Excavator Excavation Construction For United Arab Emirates

About Volvo EC480 Crawler
Equipment model: EC480D

Model abbreviation: 480 excavator

Excavator tonnage (t): 53.1

Walking mode: track type

Bucket form: Backhoe

Usage: Universal type

|Engine | Brand: Volvo

Model: D13F

Rated power (kW): 256

Working weight (kg): 53100

Bucket capacity (m ³): 1.7-3.8

Rotation speed (rpm): 8.8

Climbing ability (%): 11 °

Overall dimensions (length x width x height, transportation status) (mm): 12140 x 3340 x 3257

Maximum excavation radius (mm): 12040

Maximum excavation radius of the parking surface (mm): 11810

Maximum excavation depth (mm): 7720

Maximum excavation height (mm): 11020

Maximum unloading height (mm): 7640

Maximum vertical excavation depth (mm): 7110

Fuel tank (L): 685

Hydraulic oil tank (L): 270

Engine oil change quantity (L): 42; Coolant (L): 60 [1]

To ensure that our quality can satisfy customers with peace of mind

We will conduct a detailed inspection of each excavator to ensure that it is in good working condition

System inspection items and requirements

1. Appearance and structural inspection requirements:

Check the large and small arms for any welding or cracks (signs of refurbishment)

2. Engine system inspection requirements: Engine exhaust, no abnormal noise, no blue smoke, no carbon buildup in the exhaust pipe, no oil leakage in the oil pan, and no noise during idle.

3. Hydraulic system inspection requirements: The hydraulic pump/motor should have no vibration, cracks, or oil leakage, pressure stability, the chrome plating layer of the oil cylinder should have no scratches or oil leakage, the operation should be smooth, and the pipeline should be confirmed to have no bulges or aging.

4. Electrical system inspection requirements: The computer board should display speed, pressure, and fault codes normally.

Line: The lighting, air conditioning, and alarm system are functioning properly.

5. Inspection requirements for walking system:

Track: The rubber layer has no cracks, the chain rail has slight wear, and the chain number is consistent with the machine

Motor: When walking, the speed on both sides is consistent, and the walking is normal

6. Cooling and intake system inspection requirements: The radiator should be clean and free of dust, and the fan tape should not be loose

List of vulnerable items that must be replaced before mechanical shipment:

Replace with new engine oil, hydraulic oil, gear oil, new air filter, oil filter, diesel filter, replace inlet/return/pilot/pipeline filter elements, and other damaged components will also be replaced with new ones